Structural Steel

STRUCTURALS

At MSP we have always aspired to build a strong identity for the nation by manufacturing quality structural steel sections and with a distribution network spread across the country, catering to a wide range of industrial, infrastructural, and agricultural sectors contributing to the nation's core infrastructure.

Image
Image

What sets MSP Structurals a notch higher than the rest is the extensive range of light, medium and heavy sections as well as unique sectional attributes that enhance their corresponding end-user performance. At MSP, we manufacture H beams, I Beams, Channels, Angles, and Round bars which conform to BIS certified quality standards thereby fulfilling consumers’ requirements for multiple industries contributing to building the nation of tomorrow.

PROPERTIES

Physical properties

Physical properties of structural steel, as detailed by cl.2.2.4.1 of IS 800:2007, irrespective of its grade applies to MSP Structural sections as well. They may categorised as:

  • Unit mass of steel, p = 7850 kg/m3 
  • Modulus of elasticity, E = 2.0x105 N/mm2 (MPa)
  • Poisson ratio, p = 0.3
  • Modulus of rigidity, G = 0.769x105 N/mm2 (MPa)
  • Coefficient of thermal expansion cx=12x10 -6/0C
Image

Mechanical properties

The principal mechanical properties of structural steel, as detailed by the code IS 800:2007 in cl. 2.2.4.2, applicable to MSP Structural sections are

  • the yield stress, f y
  • the tensile or ultimate stress, fu
  • the maximum percent elongation on a standard gauge length and notch toughness.
  • Except for notch toughness, the other properties are determined by conducting tensile tests on samples cut from finished goods in accordance with IS 1608. 
Image

ADVANTAGES

Our wide range of BIS certified Structural Steel With its nationwide availability are used in multiple segments- domestic. agricultural. industrial & infrastructural. A state-of-the-art manufacturing facility and strict quality control measures hold the promise of quality products catering to various economic segments thereby laying the foundation for the nation of tomorrow.

Widest range of products

View More

Widest range of products

Product range includes Angles, Channels, H-Beams, I-Beams, Round Bars and Dowel Bars which are made of multiple standard specs and sizes as well as cut to length and customized sizes as per customer requirements.

Higher load carrying capacity

View More

Higher load carrying capacity

Due to exceptional sectional attributes, MSP structural steel sections have superior strength to weight ratio which is useful for all kinds of constructions.

NABL certified testing facilities

View More

NABL certified testing facilities

MSP structural steel comes with the guarantee of quality certifications from the NABL certified lab at its integrated steel plant.

Convenience of fabrication

View More

Convenience of fabrication

MSP structural sections find a wide range of application in the infrastructural, commercial, industrial, domestic and general engineering segments.

APPLICATIONS

All MSP products are made from quality raw materials and pass through rigorous quality checks. Thus, our products are highly customisable and are used for a wide range of segments.

General Engineering

View More

General Engineering

Automobile Chasis (bus. trailer) Truck & Bus Body Members Agricultural Equipment Bus Shelter Hoarding Structures

Infrastructural

View More

Infrastructural

Platform Sheds Pedestrian Walkovers Foot Over-bridges Sign Supporting Structures Energy Infrastructure (Electric Pole) Road Construction Barrage Gate Water Tank Tower

Domestic

View More

Domestic

Roofing Grills Window Reinforcement Structures Building Commercial Houses

Industrial

View More

Industrial

Equipment Establishment Industrial Trusses Factory/PIant Sheds Fabrication

PRODUCT SPECIFICATIONS

Image
Product Steel Structural Sections
Chemical Symbol % Limit % Variation
Carbon C 0.10-0.23 0.02
Manganese Mo 0.40-1.5 0.05
Silicon Si 0.40 Max 0.03
Sulphur $ 0.05 Max 0.005
Phosphorous P 0.055 Max 0.005
Physical Properties Material will be supplied in semi killed (A1) condition with limiting carbon equivalent 0.42 Max
Minimum yield strength 250 MPa
Minimum tensile strength 410 MPa
Minimum % elongation 23
Normal Dimensions of Rolled Structural Sections IS 80
Weight tolerance on per m length Channel Beam
Up to 200 mm depth +4%,(1)%
Other section +2.5%
Normal Dimensions of Rolled Structural Sections 10m to 13m
Customised length could be supplied based on supply terms and conditions
Length tolerance +250mm
Size Tolerance/ Weight Tolerance Asper BIS standard - IS 1852
Grade of Material As per IS 2062,Fe 250 A
Sections in Cu-bearing steel and higher-grade material could be supplied based on supply terms and conditions
End Finish Mechanically sheared/gas cut finish Supply in As Cut Conditions
Weldability Weidable with common M.S. electrodes without pre heating
Marking/Identifica- tion of Product Every Structural Section is embossed (hot rolling) with size detail, SI mark and Co's logo/Mark along the length at regular intervals
Order information While placing an order, the following technical information would be needed:
  • Size and length of each piece and quantity
  • Steel specification with grade/chemical composition/physical properties
  • Test certificate requirement
  • Special, requirements if any

Angle

Section Description Dimension (A) x (B) x (t) mm Section Weight(w) (Kg/Mtrs) Section Area (a) cm2 Cxx Cyy (cm) Moment of inertia (cm2) Radius of Gyration (cm4) Moduli of Zxx = Zyy (cm)
Ixx = lyy luu Ivv rxx- =ryy ruu rvv
A50x5050x50x6 4.5 5.66 1.45 12.9 20.6 5.3 1.51 1.9 0.96 3.6
A65x6565x65x6 5.4 7.44 1.87 29.1 46.5 11.7 1.99 2.5 1.26 6.2
65x65x8 7 9.76 1.89 37.4 59.5 15.3 1.96 2.47 1.25 8.1
65x65x10 86 12 1.97 45 71.3 18.3 1.94 2.44 1.25 9.9
A75x75 75x75x6 68 8.66 2.00 45.7 73.1 18.4 2.3 2.91 1.46 8.4
75x75x8 8.9 11.4 2.14 59 94.1 24 2.28 2.88 1.45 11
75x75x10 11 14 2.22 71.4 113 29.4 2.26 2.84 1.45 13.5
A90x90 90x90x6 82 102 2.43 80.1 128 32.0 2.77 2.50 1.75 12.2
90x90x8 108 13.8 2.51 104 164 42.0 2.75 3.47 1.75 16.0
90x90x10 13.4 17.0 2.59 127 202 $1.4 2.73 3.44 1.74 19.80
A100x100 100x100x6 92 11.7 2.63 11 176 44.5 3.09 3.91 1.95 15.2
100k100x8 12.1 15.4 2.76 145 232 58.4 3.07 3.88 1.95 20.0
100x100x10 149 19.0 2.84 177 282 71.8 3.05 3.85 1.94 24.7
A130x130 130.130x8 159 20.3 3.50 335 526 136 4.04 5.10 2.59 14.9
130x130x10 19.7 25.1 3.59 405 640 166 4.02 5.07 2.57 43.1
130x130x12 23.5 29.9 3.63 476 757 196 3.99 5.03 2.56 $1.0
A150x150 150x150x10 22.9 29.2 4.00 634 1010 260 4.66 5.87 2.98 58.0
150x150x12 273 34.0 4.16 746 1190 306 4.63 5.84 2.97 40.8

CHANNELS

Image
Section Description Dimension (h)x(b)x(tw) mm Section Weight (w) (Kg/ Mtrs) Section Area (a) (cm ²) Centre of Gravity (Cyy) cm Moment of Inertia (cm 4) Moment of Section (cm³) Moment of Section (cm)
Ixx I yy Zxx Zyy rxx ryy
MC75 75x40x4.8 7.14 9.1 1.32 78.5 12.9 20.9 4.81 2.94 1.19
MC100 100x50x5.0 9.56 12.2 1.54 192 26.7 33.5 7.71 3.97 1.48
MC125 125x65x5.3 13.1 16.7 1.95 425 61.1 68.1 13.4 5.05 1.91
MC150 150x75x5.7 16.8 21.3 2.2 788 103 105 19.5 6.08 2.2
MC200 200x75x6.2 22.3 28.5 2.2 1830 141 181 26.4 8.02 2.22
MC250 250x80x7.2 30.6 39 2.3 3880 211 307 38.5 9.92 2.37
MC300 300x90x7.8 36.3 46.3 2.35 6420 313 428 47.1 11.8 2.6

MS ROUND

Size in mm Wt/Kg/Mtr. Size in mm Wt/Kg/Mtr.
30 5.55 125 96.34
32 6.31 140 120.84
36 7.99 160 157.84
38 8.90 180 199.76
40 9.86 200 246.62

BEAM

Image

I-BEAM

Size Description Dimension (h)x(b)x(tw) mm Section Weight (w) (Kg/ Mtrs) Section Area (a) (cm²) Moment Inertia of (cm4) Moment Section of (cm³) Moment Section of (cm)
Ixx Iyy Zxx Zyy rxx ryy
MB100 100x50x4.7 8.9 11.4 183 12.9 36.6 5.16 4 1.05
MB125 125x70x5 13.3 17.0 445 38.5 5.16 1.51 71.2 11.0
MB150 150x75x5 15 19.1 718 46.8 95.7 12 6.13 1.57
MB200 200x100x5.7 24.2 30.8 2120 137 212 27.4 8.29 2.11
MB250 250x125x6.9 37.3 47.5 5130 335 410 53.5 10.4 2.65
MB300 300x140x7.7 46 58.6 8990 486 599 69.5 12.4 2.86

H-BEAM

Size Description Dimension (h)x(b)x(tw) mm Section Weight (w) (Kg/Mtrs) Section Area (a) (cm²) Moment of Inertia (cm4) Moment of Section (cm³)
Ixx Iyy Zxx Zyy
RSJ 116 116x100x8.5 23 29.3 643.8 143.5 111 28.7
RSJ 152 152x152x7.9 37.1 47.4 1970 700 259 91.9

PROCESS QMS

Process Quality management is at our core when it comes to manufacturing our wide range of products. A rigorous Quality Management System conforming to ISO 9001:2015 standards help us maintain a benchmark in production quality. We are equally committed to the environment and hence comply with Environment Management Norms (14001:2015). Our workforce dedicatedly follows the Health & Safety Management System (45001:2018), creating an innocuous working environment for all. Our products are certified under BIS norms and are tested at our NABL certified lab.

Image

AD CAMPAIGNS

OOH ADS

DIGITAL ADS

Trade magazine Ads

Image
Image

Corporate Office

South City Business Park, 10th Floor, 770 Anandapur Road, E.M. Bypass.
Kolkata 700107.

contactus@mspsteel.com

+91-3340-057777

Plant

Manuapali, Jamgaon, Raigarh, Chhattisgarh 496001, India